| Cabinet Handle | #10-32 x 1″ Phillips Oval Head Machine |
| Cabinet Hinge | #8-15 x 3/4″ Phillips Pan Head Sheet Metal |
| Cheek Block Support | #8-15 x 1-1/4″ Phillips Oval Head Wood |
| Early Cabinet | #8-15 x 1-3/8″ Phillips Oval Head Wood |
| Early Harp | #12-11 x 1″ Phillips Pan Head Sheet Metal Type A |
| Front Cheek Block | #8-15 x 1″ Phillips Flat Head Wood |
| Hammer Comb | #8-32 x 1/2″ Phillips Pan Head Thread Cutting |
| Harp Brace | #8-15 x 1/2″ Phillips Pan Head Sheet Metal |
| Large Late Cabinet | 1/4-20 x 2″ Phillips Oval Head Machine |
| Late Damper Release Set | #8-32 x 1/4″ Phillips Pan Head Thread Cutting |
| Late Harp | #12-24 x 7/8″ Phillips Pan Head Machine |
| Leg Flange | #10-32 x 3/4″ Phillips Truss Head Machine |
| Name Rail | #8-15 x 1-1/4″ Phillips Pan Head Sheet Metal |
| Pickup | #8 x 1/2” Hex Sheet Metal |
| Pickup Rail Frame | #10-12 x 5/8″ Phillips Pan Head Sheet Metal |
| Rear Cheek Block | #10 x 1-3/4″ Phillips Flat Head Wood |
| Small Late Cabinet | #8-15 x 1-1/2″ Phillips Oval Head Wood |
| Tine Block | #10-32 x 3/8″ Serrated Flange Bolt |
| Tone Bar | #8-14 x 1-1/2 Phillips Round Head Wood |
| Tone Bar Rail Frame | #10-12 x 1″ Phillips Pan Head Sheet Metal |
|
